HP-UX networking related tools and commands

FILES
  • /etc/hosts – Hosts configuration file (resolve hosts and IPs)
  • /etc/rc.config.d/netconf – IP address, routeing address and hostname stored in this file
SCRIPTS
  • /etc/init.d/net start – Use to start, stop network service     OR
  • /sbin/init.d/net 
HPUX Commands
  1. (a) Display lan interface info
    1.       lanscan
  2. All in one lan configuration utility (lan0 is first Ethernet interface) to configure and view the system IP address:
    1.  ifconfig lan0 – Display IP info such as IP address netmask etc.
    2.  ifconfig lan0 up – Up network interface (allow traffic)
    3.  ifconfig lan0 down – Down network interactive (deny traffc)
    4.  ifconfig lan0 192.168.1.1 netmask 255.255.255.0 up – Setup/change IP adddress
  3. Displaying host name
    1.      hostname
  4. Arp administration (cache)
    1.   arp -a  
  5. Display routing table/info:
    1. netstat -nr
  6.   Define new route:
    1. route add default 192.168.1.254 1
  7. HP’s LAN diagnostic tool
    1. lanadmin
  8. Test a remote host connectivity
    1. ping host.mycorp.com
  9. Setup various lan properties, dns client, NIS client configuration etc using GUI tool:
    1. sam
    2. set_parms
  10.  Check dns connectivity
    1. nslookup http://www.google.com
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s